1 / 4
Cardo Packtalk Edge mount for Shoei Neotec 2 / GT-Air 2 / J-Cruise 2 — zdjęcie 1
1 / 4

Cardo Packtalk Edge mount for Shoei Neotec 2 / GT-Air 2 / J-Cruise 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cardo Packtalk Edge mount for Shoei Neotec 2 / GT-Air 2 / J-Cruise 2

Ocena
4 / 5
Polubienia
56
Wydruki
2
Wyświetlenia
5319
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

Cardo Packtalk Edge mount for Shoei helmets compatible with SRL-2

Recommended settings: 4+ walls, infill - yes ;) , layer 0.2mm, brim 5mm+, supports: Yes, only on the table + forced support in place shown in one of pictures.

Recommended material: Nylon, PC, PC+CF. PETG also seems to work just fine.

If You find that item useful, please give it a like. Thanks.


STATEMENT: Hereby, additionally to the terms and conditions mentioned in Standard Digital File License, I allow to use STL files for the purpose of getting item 3D printed by 3D printing service of choice as long as mentioned files are not reused by 3D printing service entity in any way.

Tagi