Oase skimmer mount extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This makes the Oase skimmer usable with aquariums with a top brace.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a top brace in you aquarium you can't mount a skimmer. I have the oase skimmer and I made a thingy that allows you to mount it in that case.
Print instructions
- use fish friendly material like PETg!
- 4 perimeters
- 15% infill
- decide which screw type you want and print everything twice
Assembly
- remove the suction cups from original skimmer
- screw the spacers in place
- install the suction cups onto the printed spacers
- align spacers so the opening for the suction cups points downwards
- add the skimmer to your tank
Additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.