1 / 2
Funny Flexi Octopus Keychain - Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original Octopus Github link: https://github.com/DrLex0/print3d-funny-flexi-octopus
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 879
- Wydruki
- 5
- Wyświetlenia
- 2431
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (1)Kolekcje (109)Powiązane
- Rafts: No
- Supports: No
- Resolution: 0.15 mm
- Infill: 15%
A 0.2 mm layer height should work well, but 0.15 mm gives a smoother result (expect between 4 to 5 hours print time at this resolution).
If your slicer supports variable layer height, using thinner layers for the top of the head will provide an even nicer result.