1 / 1
Holder for STM32 NUCLEO-F411RE board — zdjęcie 1

Holder for STM32 NUCLEO-F411RE board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A safe way to hold and secure an STM32 NUCLEO-F411RE board. It should work with other NUCLEO 64 boards as well.

Ocena
4 / 5
Polubienia
1
Pobrania
155
Wydruki
1
Wyświetlenia
663
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Updated: Added additional ribs for support.

This is designed to have the short M3 heat-set inserts put into it. Personally, I use the ones from CNC Kitchen. I use M3 6mm socket head cap screws.

This should work with all NUCLEO 64 boards, but I only checked with the F411RE board, so I can't be certain.