Deadbolt Cover for Child Proofing (Extended)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for locks with a standard USA 64mm deadbolt. Remixed to add taller enclosure and lid for those tall kids.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits 64mm standard USA deadbolts just like the parent model, so scale it as needed to fit your deadbolt. Print with supports and go really slow on those overhangs.
To install, loosen the two screws on the interior plate of the deadbolt, slide the cover under the interior plate from the bottom and tighten screws to secure in place.
Use a M3x6 or M3x8 to secure the handle to the lid, it screws directly into the plastic. Sand the lid where it makes contact with the door and the body until the desired interference fit is achieved, I slightly over sized it for that purpose.
Modify my CAD file for yourself here, but please respect the license: https://cad.onshape.com/documents/796fbb93f64bf4ebaa6411b3/w/848556071fbad9f66623fe08/e/e9682cbfd03a5bb5a68efdf5