Enclosure Case Insert for RAK Wisblock - Meshtastic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket Insert for RAK Wisblock Starter Kit (RAK19007 + RAK4631)
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 4449
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
** You can purchase this already printed/assembled from my store by clicking HERE **
UPDATE: New STL uploaded with threaded posts for the new PCM model from voltaic enclosures
UPDATE2: New STL uploaded with GPS location moved to point upward for vertical mounted nodes; reworked bottom mounting notch to make more room for connectors.
This insert works for the RAK Wisblock starter kit w/ GPS Module and 2x 18650 batteries. I also recommend running some type of PCM to prevent overcharging the batteries on the top end, and also preventing undervoltage to the wisblock preventing damage.
Required Hardware:
RAK 19007 & RAK4631
YETLEBOX Enclosure (5.91" x 3.94" x 1.73"): https://a.co/d/1gAKfkj
Two (2) 18650 Batteries: https://a.co/d/fJWL7UV
Battery Tray: https://a.co/d/bXWjR2Z
Two (2) M4x6 screws (Secure Backing Plate to enclosure)
Four (4) M3x4 screws (Secure double 18650 battery tray to enclosure)
Optional Hardware:
RAK GNSS Module (GPS)
4Pack Rubber Magnetic Feet: https://a.co/d/atZhPoL
Flushmount USB-C Connector: https://a.co/d/hXoxCu0
Breather Vent: https://a.co/d/btAd3CH
Battery Protection Module (PCM): PCM