Chain Store Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple remix to print the chain in place and also strengthen the lid.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 112
- Wydruki
- 4
- Wyświetlenia
- 390
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
The genius of this puzzle is its simplicity. Thank you for making this!
You can print the chain in place which I think is a little more graceful way to do it. Anything that avoids the use of superglue has to be an improvement. This chain will not break.
You'll of course need to use a brim to print the chain, but it is easily removed after printing. Supports are not necessary. Print .20mm with 15% infill.
I slightly beefed up the end of the lid. It broke it for me immediately when trying to force it on; this fixes that.
Lastly, the box was almost too short for the chain to fit, so I vertically extended it exactly 1mm.