Vases, Finned Single Wall Flexible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some time ago I had designed a flexible vase and never posted it. I thought designing something similar would look…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
Some time ago I had designed a flexible vase and never posted it. I thought designing something similar would look good with dual color silk. So here they are. Four different versions. One 102mm and the rest 77mm. They all can be scaled. The bottom base is solid. They are intended to be printed as single wall models.
NOTE: It is fun to flex these, but be warned that overdoing it might cause cracking. These make good pen and pencil holders.
I used both eSun and Enisina dual color silk blue-green. The eSun green has a darker shade. Both brands work well and look very close.
Printed on both BL X1C and Prusa s3+.
60 degree bed temperature. 220 first layer temp, and 215 deg for all the rest of the layers. Make sure to use at least 4 bottom layers after setting up spiral mode.
I used both .2 and .16mm layers. Both .step and .stl files for each shape.
Category: Sculptures