Italian Racer Slot Car Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic kit for a slot car. I took the shell, lightened it, removed the windscreen and made a buck for…
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 260
- Wydruki
- 0
- Wyświetlenia
- 1182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a basic kit for a slot car.
I took the shell, lightened it, removed the windscreen and made a buck for vacuforming the glass.
I also provided a chassis based on my adjustable wheelbase chassis. It takes a standard pod, you could make a cutout in the rear cross member to make an inline as well.
I print the body at 0.06 layer height. I print the buck at the same layer height, then sand it smooth before pulling glass with it.
The chassis is 100% infill, layers don't matter for that.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Filament: Inland PLA
Category: Hobby