Portable Monitor Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monitor stand will hold up to a 17.3in monitor up to .600in or 15.24mm thick.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 181
- Wydruki
- 1
- Wyświetlenia
- 2283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Monitor stand will hold up to a 17.3in monitor up to .600in or 15.24mm thick. The stand comes in two different leg sizes, a short and a long.
Required Hardware
1x 1/4x20 x 3in bolt
1x 1/4x20 x ¾ bolt
2x 1/4x20 nuts
3x ¾ #6 wood screws: https://www.amazon.com/Flat-Head-Coated-Phillips-Screws/dp/B07B5VSFXJ/ref=sr_1_1_sspa?crid=12VHIH2B7AY6R&keywords=3%2F4+x6+wood+screw+sprax&qid=1701640434&sprefix=3%2F4+x6+wood+screw+sprax%2Caps%2C125&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
Printing Suggestions
PLA/PLA Plus or any other more rigid filament. I would not suggest PETG; it's too flexible, based on my testing with this model.
3 or more perimeters.
20% or more infill.
Monitor_Base: I'd suggest adding extra top and bottom layers to make it more rigid. I did 10 top and 10 bottom layers, and it seems pretty good from my testing.
Monitor_Adjustment_Nut: 100% infill
Looking for a stand to hold your handheld up as well? Consider taking a look at my dual-screen handheld project. It's all interchangeable with these parts! https://www.printables.com/model/817062-lenovo-legion-go-dual-screen-egpu-stand
Please share a Make and give it a Like if you enjoy the model :)
Have a suggestion? I'd love to hear from you!
Happy printing!