1 / 1
Avon S10 respirator decorative lens rims
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of snap-fit rims to add colour/protection etc. to an S10 respirator
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
This is a set of lens rims for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. They should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods.
Support shouldn't be needed, print outer face down. I use Bambu PEI textured and smooth plates and the outer looks good in both.
Pictured is Bambu green PLA and PolyLite glow in the dark/UV reactive yellow PLA.
