Mini Wheels BBS LM Rolling Wheel Stand (135% scale)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rolling Stand for BBS LMs by Schumo 135% scale
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE THIS IS FOR THE WHEELS AT 135% SCALE AND DEEP DISH RIMS
The BBS LMs by Schumo was the first big print I ever did, but its been sitting on a failed V8 print for months.
I've just picked up fusion 360 and decided to use this to learn modeling.
Hardware required:
5 x M5 x 16mm bolts
608 bearing (mine was 3d printed, but a real one would spin alot better)
I used these bearings: https://www.printables.com/model/541192-print-in-place-bearings
by @Jerryie
Bearings are press fit with 0.1 tolerance in the gap
The bolts are threaded into the hub directly, no nuts required
drop me a tip if you'd like :) https://ko-fi.com/sidebyslide