Dosing Cup-Attachment for Eureka Mignon Single Dose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachment for the dosing cup to avoid distribution of finest coffee particles all around the grinder.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When the ground coffee was blown out, the finest coffee particles were distributed around the grinder. As a result, a fine film of coffee dust has formed on the work surface.
To avoid this, I designed this attachment for the dosing cup supplied with the Eureka Mignon Single Dose. It is simply placed on the dosing cup and stays in place without being too tight. The cup is placed with the attachment under the coffee ejector of the grinder. It should be noted that the cup is first placed on the base at an angle, front first, and then tilted backwards until the entire base is resting on the base.
The top can be quickly removed again before transferring to the portafilter.
The chamfer inside the attachment ensures that the ground coffee does not collect on the upper edge of the dosing cup. The chamfer at the bottom is only incorporated for easier handling.
If there is a need for customization, I will be happy to provide the Fusion file on request.
NEW - 19. April 2026: If you are looking for a solution that is connected directly to the machine, this model might be an alternative choice: https://www.printables.com/model/1694213-eureka-mignon-single-dose-output-attachment