1 / 2
Walksnail V2 / 20X20 Adapter for HSKRC XL5/6/7/8/9
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that will allow you to fit the walksnail V2 or 20x20 vtx's
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model I made for the hskrc XL series frames that fits the walksnail v2 vtx.
Print flat with supports for the small overhangs on the pillars, prefferably with tpu