1 / 3
Magnetic Hoop for Perforated Paper Cross Stitch — zdjęcie 1
1 / 3

Magnetic Hoop for Perforated Paper Cross Stitch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a hoop used for cross stitch on perforated paper. Hoop is easier to hold and protects the paper while stitching

Ocena
0 / 5
Polubienia
56
Pobrania
143
Wydruki
1
Wyświetlenia
1389
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Cross stitching can also be done on perforated paper.  When someone uses cloth, the cloth is often clamped in a hoop to keep the cloth tight and give the stitcher something to hold.  Perforated paper cannot be clamped into one of these hoops.  This hoop makes it easier to hold the paper while stitching.  

Two of these should be printed to make up a complete set.  Embedded magnets align the two pieces and clamp the work.  

The design has 8 holes for 6x3mm permanent magnets that are easy to find.  The holes are completely embedded in the design.  In your slicer, define a pause point at the top of the hole.  Place your magnets in the holes, then continue.  The top of the hole is at 4.2mm.  This way, you do not need to glue in magnets or risk them falling out.  

Magnets like these:  https://www.amazon.com/gp/product/B0CCXC4HWV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It is critical that all the magnets are placed in 1 side with the same polarity.  When placing the magnets in the other side, be sure to reverse the polarity.  You do not want any of the magnets from each side repelling.  

I included two different sizes, 4"/100mm and 5"/125mm.  I also included the Free Cad Design files for remix.