1 / 2
Case for ESP32 dev breakout board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
case for esp32 dev breakout board with two screws
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
just another case for esp32 dev breakout board.
find the board on Aliexpress
Lid and bottom part which can be screwed together.
M3 - 10mm max.
Printed fine with PLA and 0.6 nozzle.