PanelDue 5i Housing for Sapphire S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Housing for the PanelDue 5i Clone by Fysetc (…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Housing for the PanelDue 5i Clone by Fysetc ( https://de.aliexpress.com/item/33004947638.html?spm=a2g0s.9042311.0.0.27424c4dqdux2o )
Please note that the FYSETC Version of the 5i differs to the original one!
There are two versions. One with 2 Button holes (16mm) and one with just one. I Use the 2 hole version to switch the LED lightning on and off with a momentary switch and the 2nd hole for a self reset momentary switch in combination with an SSR to switch the printer on by pressing the button for 2 Seconds, and swith it off by Menu or End-GCode. Both holes are 16mm diameter.
Print with front down and support the brackets.
I use PLA since its strong enough for this.
You can use the screws from te Housing of the original Display of the Sapphire S
Print Settings
Printer:
Sapphire S
Rafts:
Doesn't Matter
Yes
Infill:
20%
Filament:
REDLINE or any other PLA or PETG is enough what you like
Category: 3D Printer Parts