Sapphire V6 Nimble Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount to fit the Zesty Nimble with an E3D V6 Hotend on the TT Sapphire S. Its based on parts of the MGN BLV…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount to fit the Zesty Nimble with an E3D V6 Hotend on the TT Sapphire S.
Its based on parts of the MGN BLV Project ( https://www.thingiverse.com/thing:3382718 ) and parts desigend by ZestyTech for the BLV.
Please note, that you loose about 3mm in Y due to the Coverdesign! Change bed meassurements in the Firmware to avoid collisions!
2nd Note! If you dont use the parts by ChrisKissling to raise the X/Y Steppers and get rid of the Motor-shafts you loose even more in Y because of the upper bearings of the shafts.
Print all parts with >90% infill, except the Cover with the FanDucts for this is about 30% infill enough. I prefer PETG.
For Part-Cooling you need 2 4010 Blower Fans, and for the Hotend cooling you need a 40x40x10 normal fan. I prefer Sunon they have enough airflow and are still relatvely quiet.
If you have any questions, feel free to contact me.
Thanks to @BenLevi and @ZestyNimble
Print Settings
Printer:
TT Sapphire S
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
0,2mm
90%
Filament: Doesnt matter - I use DevilDesign PETG Like you like
Category: 3D Printer Extruders