Wall Mount Clothing Rack - Larger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mounted clothing rack with 5 hooks. This is a larger version to span 16 inches.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple wall mounted clothing rack with 5 hooks. I made a smaller one that I posted previously https://www.printables.com/model/744810-wall-mount-clothing-rack . I enlarged this to span 16 inches which in the United States is the width of 2x4 studs for walls. I have 2 recessed screw mount holes for a #8 screw (4.25mm thread diameter) just to provide mounting flexibility. I used a 9.5mm neodymium disc magnets (pressed in) for the top holes to hold the ends together but I should have just glued them together. I used organic supports for the overhangs. I had to position rack diagonally on the print bed for my MK3S to fit.
Print Settings:
.20mm layer height
20% infill
Organic Supports on print bed