Ankermake Gridfinity Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold your Ankermake tool kit in an easy access, 3x2 Gridfinity bin.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The Ankermake M5 comes with a handy little toolkit stored in a terrible case. I got tired of prying tools out of the case, so I made this gridfinity based bin that holds everything except the nippers. There's tons of nipper holders for gridfinity out there, so I didn't include those.
All of the tools slip right in with cutouts for your fingers to fish them out. The double ended wrench is raised on standoffs to make it easy to grab.
Walls are 0.8mm, so 2 vertical shells is all you need. I also printed with 2 bottom layers and 3 upper layers and 10% infill. The result is plenty strong.