Music Note Polymer Clay Cutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sharp cutters made for use with polymer clay.
- Ocena
- 0 / 5
- Polubienia
- 77
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Polymer clay cutter series: Music notes!
Make sure to use cornstarch with these cutters. They are tiny, and clay can easily get stuck in them.
These cutters have a sharp, thin cutting edge and can be fragile. Choose a sturdy filament (PLA is best) to avoid warping and breakage when you press on them. I always print my cutters at .15mm layer height, so your mileage may vary with other heights.
I don't recommend sizing these down, as they are already quite small, but feel free to size them up! They work best with thinner clay, but I have had success with clay up to 4.8mm thick.