1 / 5
Volkswagen Gold seat grip (1998) (1H0 881 253) — zdjęcie 1
1 / 5

Volkswagen Gold seat grip (1998) (1H0 881 253)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grip for the drivers seat to change the seat inclination on the VW Gold Replaces original part no. 1H0 881 253

Ocena
0 / 5
Polubienia
4
Pobrania
92
Wydruki
0
Wyświetlenia
583
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
GNU General Public License v3.0

This is a replacement part for a Volkswagen Gold 1998 (Cabrio)
We had the original seat grip broken off, it's used to change the drivers seat inclination.


As this is my first 3D model I ever made feedback is most welcome.
I haven't printed the final version yet at the time of posting this so I will come back to the post with photos once I actually finished it and post processed it with some sanding and spray paint.

 

Printer

AnyCubic i3 Mega S with TMC2208 and updated marlin 2.0 firmware.

Print took around 3 hours to complete with the below settings.

 

Print settings

0.2mm res.
20% infill (You can do more if you think it might break off easily)

Supports enabled.


I recommend printing it as show in the photos with the round end upwards to ensure its square inside and round outside for the best fit. This way it does require some supports to be removed after printing and maybe you want to sand it down a bit so its smooth.

Tagi