Raspberry Pi 5 case with x1001/x1004 adapter and 12cm USB fan support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 5 case with x1001/x1004 NVME adapter and 12cm USB fan support to drastically reduce Raspberry temperature.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 76
- Wydruki
- 2
- Wyświetlenia
- 945
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Impression recommandations:
- 15% infill
- PLA or PETG
- 0.20mm
- Organic support
Used components:
- 12cm USB fan: https://www.amazon.fr/gp/product/B06XCTHQG3
- Raspberry x1001 or x1004 NVME adapter: https://www.amazon.fr/dp/B0CPLF6JYX
- M3: https://www.amazon.fr/gp/product/B096Z55621
- 3*M8
- 4*M35
Mount instructions:
Use a big screw to remove the bottom supports. Just turn from the middle of the support a few millimeters, then push out. The support will come by itself. Repeat this for the 3 required adapter screws:
Add the adapter screws to the bottom until you see from the inside of the case. Then add the raspberry with the adapter in the case and fill it into the top of the screws.
Next, add the adapter, unscrew it a little bit, and maintain the raspberry and the adapter while screwing it again. Repeat for each screw, and the raspberry will be well-maintained to the case.
For the fan, use the 4*35 M3 screws. Finally, use the 3*M8 screws to join the fan support and the case.