1 / 5
The Owl House Tents and Ruins — zdjęcie 1
1 / 5

The Owl House Tents and Ruins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,20 € – 0,25 € netto (bez VAT)

Dla pliku: tent eda_0.4n_0.2mm_PLA_MK3S_18m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,22 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
18,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Model of the ruins and tents on the Knee from The Owl House

Ocena
0 / 5
Polubienia
14
Pobrania
41
Wydruki
0
Wyświetlenia
182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Model of the ruins, tents and a tree from the Knee from The Owl House, S01E12 Adventure In The Elements.

Print Instructions

Everything was printed at 0.2mm layer height.

PartDimensionsSupports
ruin wall151mm x 16mm x 82mmyes, organic
wall undamaged166mm x 16mm x 82mmyes, organic
tent eda20mm x 18mm x 19mmyes
tent blight43mm x 42mm x 53 mmyes, organic
tree36mm x 32 mm x 60mmno

When printing the tree, make sure that you either:

  • print two or more trees (of the same height) at the same time, OR
  • reduce the print speed at the top, starting at ~40mm

If you do not, the top will come out messy because there isn't enough time to cool between the layers.

 

 

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

Tagi