BVB pencil case with personalized label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BVB pencil case can be personalized. It is printed using TPU and PETG. The case has magnetic seals.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 1123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This pencil case has been printed using TPU and PETG. There has to be a stop while printing at 2.6 mm height to insert magnets (20 mm x 10 mm x 2 mm, Neodym magnet). The stl part named “flexible base area” is the only part that is printed in TPU and enables bending to close and open the case. Don't rearrange the order of the STL part (except of the letters). Don't try to print the wall using INPUT SHAPE mode. I glued the sides to the flexible wall part using Pattex "Alleskleber".
The version “BVB pencil case - wall.3mf” has no label/name (the fotos show an example with the name “Laurenz”).
The new version “BVB pencil case - wall v2.3mf” for the wall allows to create your own name/label having a width of 40 mm, 60 mm or 80 mm. To create your own name you just have to delete the letters you don't need or create copies of those you need several times. Next, you position them laterally (only modify x and y coordinates) using the move command so that they are ontop of the support for the text. Finally you delete two of the three possible objects "support below text-40mm", “support below text-60mm” or "support below text-80mm", just depending which width serves your needs.