1 / 7
Anycubic Kobra 2 Max Wire Grommet: Helps protect your investment.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
From the Heated Bed MOSFET compartment to Mainboard the Wires are resting on a sharp edge of metal from the PSU.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (34)Powiązane
Wire Grommet: While doing mods I noticed the opening from Heated Bed MOSFET compartment to Mainboard the Wires are resting on a sharp edge of metal from the PSU with all the vibration of machine this area has potential to cut wires cause damage to your Kobra 2 Max and is a potential hazard. I Recommend installing a grommet to protect your investment.
Install: Take off Heated Bed MOSFET Cover and Push in till it stops. Simple Install