Prusa i3 MK Filament Spool Holder ClipOn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Prusa i3 MK is a great printer, but the filament spool holder could be better.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The Prusa i3 MK is a great printer, but the filament spool holder could be better.
I redesigned the original to:
- Support a tube instead of taps to hold filament spools... and more than one spool support.
- Easy attach the Prusa frame with ClipOn
Filament storing holes for holding unused filaments. The tube I use is standard electrical 20mm PVC tube that snaps into the holder. In case you like the original tab based style, I included models for that too (no tube needed).
For tube holders, the left and right holder is identical, just print two.
If you need another tube size, leave a comment and I will upload model for that size.
Based on the Original Prusa i3 MK open source files found on GitHub.
New MK3 style design: Prusa i3 Spool Holder, Single Side ClipOn
Update:
- Added holder for 22mm OD tubes.
- Added holder for M8 Threaded Rod.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 25% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed
Preferred material is PET-G, but PLA can be used. ABS will properly have corner warping problems due to the size.