Prusa Enclosure Top Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide filament through the top of your Prusa enclosure (say, from a filament dryer)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Guide filament through the top of your Prusa enclosure (say, from a filament dryer). Holds a 4mm outer diameter PTFE tube for connecting to the top of your Prusa MK3 or MK4 (other printers may work, but I haven't tested them.
Parts required:
6x M3 screws, 12mm or longer
4x hexagonal M3 nuts
2x square M3 nuts
2x Prusa enclosure push rivets. Don’t have rivets? Here’s one you can print yourself. (Not tested with this model.)
Print one each of Left Side, Right Side, and Hole Plug in the orientation indicated in the attached image, and assemble according to exploded view. Don’t forget to insert the PTFE tube before tightening all nuts!
This is probably over-engineered, but in my defense, I don’t know what I'm doing.