Hawaii Flag (no mmu required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model for the flag of Hawaii
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
This is a model for printing the state flag of Hawaii. The colors change at layer heights so you can do two manual changes to switch it out. Start printing in white, switch to red and then blue at the appropriate layers. See the included gcode for how I sliced it.
I found out that Like D.C. Hawaii has an unusually long flag. At my normal 140mm scale it would not fit on the build plate. I did a 75% scale. If you are scaling I suggest only scale in the X and Y, leave the Z alone for the color changes. I added undercuts below the blue portions to try and hide the red underneath. You can only see it when you look very close to the edge.