Screw-in, low-profile tent pole bases to mount a K&H Pet Cot Canopy in a boat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting canopy and poles from a K&H Pet Cot Canopy in my boat so my labrador can get some shade on sunny days.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
It gets too hot in my boat for my black labrador when the sun is right overhead. I saw a nice canopy that is the right size, the kind that uses flexible poles for pop-up canopy - but it is made to mount to that brands raised pet bed product. I needed something that is unobtrusive when the canopy is not in use, with no sharp edges, that could hold the tent poles and also anchor the shock-cord that attaches the canopy. The holes in these anchors can accept up to 5mm poles. The hole that the pole mounts in is opposite positioned from a slot that the shock-cord will slip into. The screw that holds it in place goes through the middle, and the entire thing self-drains so any rain that gets in there won't get freeze damage. *always a good boating accessory feature.
Printing suggestions:
I suggest printing 4 of these (you need 4 for the ends of two poles) in the same orientation in the model file. This will give you decent strength and finish. Suggest using snug supports versus organic, cuz they'll be easier to remove. Supports everywhere. The supports that hold the slot that the shock-cord goes in are tricky - use a small needle nose plier. I suggest a strong PETG (such as prusament printed at 250C) or ABS or other tough filament that can stand up to sitting out in the sun and weather.
These are meant to be positioned permanently, with the tent being removable at any time due to the canopy design. If you get the same canopy, the poles it comes with fall apart so easily, it makes rigging the canopy difficult when you're wrangling a labrador who wants to help. To help with that, I designed TPU bungies that slip over the ends of the pole pieces, allowing them to be assembled/disassembled easily, but loosely binds them together so you can't drop them overboard as easily. Easy-TPU: Pet tent pole bungies - Stop losing tent pole parts by Dan Rogers | Download free STL model | Printables.com