Webcam Strong Arm - Holder for Logitech Quickcam Pro 9000 - iPhone 6 plus and more
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just an other webcam holder, but a very strong one. Espacially for the Logitech Quickcam Pro 9000. But you can…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just an other webcam holder, but a very strong one. Espacially for the Logitech Quickcam Pro 9000. But you can easy design any holder (phones, lights, etc.) you like. If you in troubble, let me know. Mayby I can help. The base ist for an 30 x 20 mm rectangular tube. These are often used for VESA monitor holders.
Print as many arms as you like. But I think, three ist enough, if you use also one ore two joints ("Gelenk" in German).
You need countersunk head screws M6 40 or 35 mm. (In the pictures the screws are with 45 mm too long.) I also used the knob for the nuts from here: https://www.thingiverse.com/thing:1746079
UPDATE 26.06.2020:
I uploaded two files *_o.stl without integrated support.
And I put an uni_holder with an iPhone 6 plus holder to the files. The iPhone holder need support settings in the slicer. But not much and easily removable.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.20 mm
Infill:
30%
Filament:
any PLA
Notes:
If you use the files with integrated support, your printer should do good bridging, because I had only small support designed.
Integrated support
I designed the joints with a small integrated support, because I didn't want to use the slicer support. You can easily remove the thin support with a sharp knife after printing.
Category: 3D Printing