Five Nights at Freddy's Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AI-generated image processed through Huforge
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 1538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My grandson wanted a “Scary” Freddy and helped me create this. He wanted it really red cause he thought it looked more creepy. I did play with some other Hueforge settings that I thought looked better so I included the Hueforge settings I used and source picture so you can adjust as you want
220x220 Framed and Unframed versions. Add height modifiers at 0-1.2 and 3.2-7 to change layer height to 0.2 to save a ton of time.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions Framed:
Start with Black
At layer #15 (1.56mm) swap to Red
At layer #35 (2.36mm) swap to Orange
At layer #45 (2.76mm) swap to Jade White
At layer #49 (2.92mm) swap to Yellow.
At layer #52 (3.04mm) swap to Whatever color you want the border to be.
Swap Instructions Unframed:
Start with Black
At layer #15 (1.56mm) swap to Red
At layer #35 (2.36mm) swap to Orange
At layer #45 (2.76mm swap to Jade White
At layer #49 (2.92mm) swap to Yellow for the rest.