Credit Card Sewing Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A credit card sized sewing kit that you can carry in your wallet everywhere you are for on the go creations and repairs.
- Ocena
- 5 / 5
- Polubienia
- 286
- Pobrania
- 405
- Wydruki
- 5
- Wyświetlenia
- 2330
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction
Designed to be the same size as a credit card so it can easily be carried everywhere for on the go creations along with quick repairs and emergency repairs. Small tray to contain things like pins, sewing needles and more. Three separate “spools” that can hold at least 42 turns of thread so you can actually create and repair items. “Anti-unwind” feature so that you don't have the whole thread fall off the card in case you drop it by accident.
If you like it, please download, like & bookmark!
Usage
Organising
Start spooling by placing the thread through the slots available on one side, then wind as many turns as you need and slot the final turn through the slot on the other side.
Printing
Use 0.25mm layer height as the card has a final thickness is 0.2mm. This is a good test print for your printer as it takes less than 45 minutes to print, little material and requires it to be dialed in enough to bridge the gap of the tray holder.
Best is to print with recycled materials to reduce the impact of plastic in the environment.
You can also use a piece of string if your ornament has a hook, ideally cotton or a non-synthetic material.
Errata
If there are any errors which are found with the model they will be updated here for reference
Dedication
The creation, maintenance and continued development of this project is made possible
thanks to our Patreon and Direct supporters!
Consider joining them if you think this project has earned it!