Fellow Atmos Vacuum Coffee Canister Scoop Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to allow a scoop to be hung on the Fellow Atmos Vacuum Coffee Canister since it was lacking one.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I made a scoop holder to attach to my Fellow Atmos Vacuum Coffee Canister since it did not have one. I got tired of having to put my scoop on top of the canister or elsewhere that it didn't really seem to belong, so I designed this solution.
I printed it and then used a little super glue to attach it to the canister.
Filament: Atomic Filaments Pure White PLA (to try and match the canister's color)
Layer height: 0.12 mm (but can be whatever you want)
Nozzle Size: 0.40 mm
Printer: Prusa XL 5T
Disclaimer – As with any 3D-printed parts that may be used with food items, the maker/user should be aware that 3D-printed parts are not food safe unless they are properly post-processed such as by sealing the printed part with a food safe epoxy top-coat. The maker/user assumes responsibility for hygiene of anything printed and used with food items.