Meat Claws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meat Claws for pulled pork, etc.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 302
- Wydruki
- 1
- Wyświetlenia
- 1062
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Why purchase a ready made set of meat claws for a few dollars, when you could spend a few days painstakingly designing a set in CAD (and starting from scratch over and over and over again), a day printing them and hours of sanding them smooth!?
Luck you! You get to skip past the seemingly endless process of designing them, and you get to skip straight to the printing stage!
I printed the tines pointed up (see photo with test print on bed), I did .2mm layer height with a .4mm nozzle. I did find that light supports helped with the print, but adds to the clean-up.
I printed with 8 layers (top and bottom both), 8 perimeters, and 20% infill.
that might be overkill, but after the time and effort I put into these damned things, I didn't want the risk of breaking.
I opted to print in PLA, as it printed nicer than the PETG was. As a result, they are hand wash only.