Cable and Test Lead Hangers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hangers for test leads, cables, cords, or wires with 4mm and 8mm slots. Designed so multiple hangers can be combined.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 268
- Wydruki
- 3
- Wyświetlenia
- 942
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
These are a bit unusual, but suited my needs. I wanted something that could span across my glass office door, so I designed these with a 1.0 in x 0.125 in (25.4 mm x 3.2 mm) channel through the back. This allowed me to use 1" x 1/8" flat bar stock (steel or aluminum) to mount multiple hangers together. You could also 3D print a connection bar or screw each one individually to your wall or workbench.
They include lots of screw holes, sized for #6 US screws (3.65 mm holes). They were carefully designed to print without support if you print them in the default orientation: upside down from how they will be mounted.
They are quite sturdy, perhaps unnecessarily so, but I prefer knowing they won't break off if I'm rough with them or bump into them by mistake (since they are on the back of my door).
I printed them with granite PLA.
I've supplied the Fusion 360 files. I wish I could say they are properly parametric and easy to adjust for different spacings and number of hooks, but that's a project for another day (or someone else to remix). I'm a EE, so I'm just happy to be able to create things like this.