Elegant Shower Head Holder for 18-25 mm rods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shower head holder that follows design cues from manufactured ones in order to "blend in".
- Ocena
- 4,846 / 5
- Polubienia
- 175
- Pobrania
- 604
- Wydruki
- 14
- Wyświetlenia
- 2477
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Standard Digital File License
After searching for a showerhead holder to 3D print and not finding anything that matched the aesthetics I was looking for, I decided to design my own.
| Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world of difference to me and helps me offset some of the costs involved in creating these products (energy, filament, etc). |
This is what I came up with:
In the files, you will find variations of the “Showerhead adapter” STL to fit 18, 20, 22 and 25mm rods. Print the size that matches what you have at home. Print this part with normal supports with 30-degree threshold angle. I had some failed prints when I printed with less than that or with Tree supports. This file prints two parts that go together, when you remove the supports you should end up with 2 parts like in the picture below:
The pieces simply screw together, just like a regular showerhead holder. The piece highlighted in the render below serves to apply friction to the shower rod.
If your showerhead fits a bit loose, I recommend gluing a piece of waterproof rubber tape on the inside. I didn't need it in mine and I am using it without issues.
Happy showering!