Creality CR-10 or Ender 2 3 Multi Mount with Laser Module plate - Toolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CR-10 or Ender 2 Multi Mount with plate for common laser modules. Module Type: Module width 33mm, Module height 50mm…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
CR-10 or Ender 2 Multi Mount with plate for common laser modules.
Module Type:
- Module width 33mm, Module height 50mm (heat sink)
- M3 Mounting Holes
- center holes 5mm from top and bottom
Mount can be attached to the x carriage left to this type of fang.
It should also fit with the original metal fang housing.
Laser module is detachable for printing. Auto Leveling Sensor Mounting Plate is also available.
If you plan to use ABL sensor and the laser module together I provide a connection board. Visit http://bit.ly/ABLaser1
Weight (PLA 0.2 100% infill)
Toolholder: ~12g
Laser Plate: ~9g
Screws needed:
- 3x M3x10
- 1x M3x6
5,5mm head width, 2mm head height
YOU HAVE A 5V PWM Laser to connect to the 12V 3D Printer fan port?
Try this complete solution. Laser and ABL Connection Board for CR-10 and other 3D Printer
Print Settings
Printer:
Creality3D CR-10
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
100%
Notes:
Print Upside Down
Category: 3D Printer Accessories