1 / 1
Pi POE+ Hat holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pi4 with POE+ Hat side holder
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 535
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is designed for a Raspberry Pi 4 with the new POE+ HAT installed. It stands on it's side so the heat can escape more easy. The Pi is locked in place by the Ethernet cable.
There is a B version of the design with screw holes on the exterior, those are made for M2, the inner screw holes are made for countersunk M3 screws.
And a C version for two screws at the end of the construction.
Print with supports, it needs it in two places.
I have used PLA but it is better to use a PET because with the POE+ HAT the Pi will be very hot and PLA becomes yoghurt quickly :)