MK2 Ford Fiesta Window Winder Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are replacement MK2 Ford Fiesta Window Winders with the rotating knob printed in place. It should easily rotate…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are replacement MK2 Ford Fiesta Window Winders with the rotating knob printed in place. It should easily rotate with a bit of persuasion after printing.
Two versions are available
- With supports
Without supports The version without supports is a flatter design that is probably not as strong, once fitted, as the version that requires supports. See the pictures to see what I mean.
The winder fits perfectly on my 1986 Fiesta Popular Plus as in the pictures.
For the non support version I used these settings:
PLA @ 210c
- 0.2mm Layer Height
- No supports / brim
25% infill For the support version I used these settings:
PLA @ 210c
- 0.2mm Layer Height
- small brim and supports
- 25% infill
Print Settings
Printer:
BQ Hephestos
Rafts:
Yes
Yes
Resolution:
0.2
25%
How I Designed This
I took a photo of the original winder spline, added it as a raster layer with Siemens NX8.5 and then traced with the spline tool.
I then used calipers to determine the rest of the dimensions, making some changes to help with printing, e.g. the handle part being printed as one.
Category: Automotive