Functional Polygonal Easter Egg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a nice filament-efficient (54g) hollow egg to use for Easter or whatever other uses an egg can be used for!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial
Functional Polygonal Easter Egg
I found myself needing a rather large Easter Egg to put a larger toy in. All of the models I could find used a ton of filament to get the internal volume that I need. There was another polygonal egg that I liked the design of, but couldn't get it to hollow out well. So I designed my own from scratch in Fusion, then modified it in Blender for the polygons, then created this printable egg you see here.
This egg clicks together like the classics ; )
The Egg:
There are 2 models.
- The LARGE model has an internal volume of 88x88mm wide and 104mm tall. Most of the model is about 2mm thick. This is 82g of filament with 2 perimeters and 15% infill.
- The THIN model has an internal volume of 70x70mm wide and 104mm tall. This print is 55g of filament with 2 perimeters and 15% infill.
No supports are needed, but an external brim is useful on the top portion to ensure the foundation sticks well to the bed.