FreeCAD GCode import for Slic3r and Skeinforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FreeCAD GCode import Python module, imports 3D GCode from Slic3r and Skeinforge.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 1445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
FreeCAD GCode import Python module.
Imports 3D GCode from Slic3r and Skeinforge (RepRap) as groups (layers) and 3D wires (poly-lines) in FreeCAD document.
In FreeCAD you have the full power of a CAD application to visualize the generated pathways.
FreeCAD can import and export a lot of common file formats, including .STL format.
Instructions
FreeCAD is a general purpose Open Source 3D CAD/MCAD/CAx/CAE/PLM modeler, aimed directly at mechanical engineering and product design but also fits a wider range of uses in engineering, such as architecture or other engineering specialties.
Installation:
1) Install latest version of FreeCAD (version 0.12).
2) Download the GCode.zip file from this page.
3) Unpack and copy files to ../FreeCAD0.12/Mod/GCode directory.
4) Start FreeCAD and choose File->Open to open*.gcode files.
Extruding moves is shown in dark and non extruding in light grey. Each group (layer) is named Layer_xxxx, where xxxx is the extruding height in 1/100 mm.
To see individual extruding layers (groups) use the toggle/hide/show visibility option in Edit->Visibility sub menu.
This GCode import filter has been inspired by the Blender add-on found at: http://www.thingiverse.com/thing:6236
The GCode import filter is written in Python from ground up as a learning exercise (Python is new to me :).
>> If you like it, please leave a like, rating or a tip... :)