1 / 2
Fractal "Fairy Crystal" small 6 sides — zdjęcie 1
1 / 2

Fractal "Fairy Crystal" small 6 sides

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a variation on the Sierpinski Pyramid with 6 sides instead of just 4.

Ocena
0 / 5
Polubienia
13
Pobrania
60
Wydruki
0
Wyświetlenia
233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A variation of the Sierpinski Pyramid, reworked to have 6 sides.  

Recommend slicing with 0.3 mm layers to get best optical properties.  Use translucent PetG.  1 perimeter, 0 infill, 0 top layer, 0 bottom layer.  Add a height modifier near the top and set it for 100% rectilinear infill so the tip will be solid and not easily break off.

Postprocessing: Clean up the top with an razor knife or similar sharp blade.  Briefly expose the part to a heat gun to get rid of any tiny strings.  Don't over heat and warp your crystals!

There are 2 gcodes, one for single material, one for multi-material with filaments loaded in order: red, orange, yellow, purple, (unused so it doesn't matter).

Credit to aeropic for the original OpenSCAD sierpinski code: https://www.thingiverse.com/thing:2573402

These were printed with Prusa mk3s+ with MMU3.  

 

Tagi