Fractal "Fairy Crystal" small 7 sides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a variation on the Sierpinski Pyramid with 7 sides instead of just 4.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 167
- Wydruki
- 3
- Wyświetlenia
- 868
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
A variation of the Sierpinski Pyramid, reworked to have 7 sides.
Recommend slicing with 0.3 mm layers to get best optical properties. Use translucent PetG. 1 perimeter, 0 infill, 0 top layer, 0 bottom layer. Add a height modifier near the top and set it for 100% rectilinear infill so the tip will be solid and not easily break off.
Postprocessing: Clean up the top with an razor knife or similar sharp blade. Briefly expose the part to a heat gun to get rid of any tiny strings. Don't over heat and warp your crystals!
There are 2 gcodes, one for single material, one for multi-material with filaments loaded in order: red, orange, yellow, purple, (unused so it doesn't matter).
Credit to aeropic for the original OpenSCAD sierpinski code: https://www.thingiverse.com/thing:2573402
These were printed with Prusa mk3s+ with MMU3.