Custom Nespresso Capsule Dispenser MOD - wider/slanted top entry section
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My mod of the excellent "Custom Nespresso Capsule Dispenser" model, to facilitate inserting sleeves into the towers.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 358
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.:
When opening the sleeves, there's usually 2 small bits of the packaging that stick out a bit making it more difficult to fit the open sleeve into the ‘tower’ dispenser.
So, I made a ‘ramp’ with a smooth transition to facilitate slotting the sleeves in. Please see photos for a direct comparison of the original model (straight) and my mod (entry point with ‘ramp’).
I print these in PLA with infill of about 25% and a simple organic support to hold the front bit straight.