Surgical Mask Strap Longer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix was made to increase the length of the face mask strap extension. Some of the masks that are being made…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 5
- Wyświetlenia
- 206
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This remix was made to increase the length of the face mask strap extension. Some of the masks that are being made have elastic bands that are a little smaller due to design differences.
My wife has made at least 50-60 cloth masks to donate to those that are in need of them. After trying some of the strap models already available, most were smaller than what we needed, hence the remix with the extra hook on each side to increase the length.
The original strap has been reviewed and approved for use in a clinical setting by the NIH (US National Institute of Health)! This is the exact file with the added length.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
0.24, or higher if it finishes fine
Infill:
20%
Filament:
3d Solutech PLA PLA
Notes:
This is link to the model I started with:
https://www.thingiverse.com/thing:4249113
Category: Other