bottle holder for drip until the last drop for PHROZEN & ELEGOO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How many liters of resin do you waste /year ‘cause you don't have the patience to empty the bottles until the last drop?
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Here is an accessory to attach to the arm of your printer every time you want to completely empty a bottle into the vat!
ESSENTIAL when you don't want to waste time waiting for the bottle to finish dripping into the vat.
You will recover every last drop of your very precious resin which can cost up to several hundred dollars per liter. You will save money!!
just try to adopt it!
the support is made in 2 parts: the basket and the bracket.
Having a PHROZEN Sonic MINI 8Ks and an ELEGOO Mars Ultra I made 2 functional brackets but still in the process of improvement. Don't panic if you don't have the same printer, there's a good chance the measurements will match. Check with the measurements (bottom of page). Otherwise the design is simple and my file easily editable.
You are free to adapt your own bracket to my standard basket which accommodates the majority of 1L bottles up to 10 cm diameter.
The design of the basket is such that the neck of the bottle is very close to the arm so as to flow into the vat of very small printers like the SONIC Mini or the MARS Ultra.
for the ELEGOO mount I made a pre-hole in order to screw in a steel nut, rather than making this part in filament which would have been much more fragile. The steel screw will be housed in place of the tightening wheel. Choose the screw diameter that you prefer, personally I chose an M6x30 screw with an M6x20 threaded tube of 10mm in diameter. You can more simply take an M8 screw and cover it with tape to protect it. Or M10, this will have the advantage of having the threads which will grip, and you will have to be careful not to damage them, but if you are careful there is no reason.
If you notice that my 2 supports are functional on other printer models, please let me know that I update the list of affected printers, this would help the community.
The prints were made on PRUSA MK4 in poor quality ABS which I am getting rid of with this type of manufacturing.
100% filling