Inclined PTC heater stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10° inclined stand for PTC heaters. Used to heat the Original Prusa Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified the original Heater Stand for PTC Heater design by @indymusician_238719 because my PTC heater measured 80x80mm and I wanted to keep it slightly tilted to direct the heat more towards the center of my Original Prusa Enclosure.
This stand is for 80x80mm PTC heaters. It is inclined on two axes by 10°, to direct the heat towards the center of the Original Prusa Enclosure (or any other 60x60cm enclosure). Please note that the heater will deliberately not point exactly to the center of the enclosure, as I didn't want to shoot the heat directly to the Prusa MMU.