Unique Storage Container with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wavy container with lid that measures approximately 140mm wide and 60mm tall.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 103
- Wydruki
- 2
- Wyświetlenia
- 701
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a simple, but unique container for small desk items, so I decided to make this one.
The container's width is about 5.6 inches (140mm) and height is about 2.4 inches (60mm).
Finding the right alignment for the lid can be a little difficult, so I added a subtle flat spot along one spline to help.
There are 2 STL files - one for the bottom part and one for the lid.
The container pictured was printed at 0.2mm layer height with Prusa Galaxy Black PLA filament on the MK4 with input shaper.
The top was printed face down with no supports.
Print Time: Bottom = 3h4m, Lid= 2h24m
This container can be scaled down by 25-30%.