Gridfinity 1x7 Prusa MK4 Steel Sheet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa MK4/MK3 Steel Sheet Holder, modified for Gridfinity
- Ocena
- 4,5 / 5
- Polubienia
- 15
- Pobrania
- 72
- Wydruki
- 2
- Wyświetlenia
- 333
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is the Prusa Steel Sheet Holder, 3er, modified for Gridfinity! Holds three sheets, and occupies 1x7 blocks.
Can optionally be affixed with magnets, screws, clickfinity, or just by gravity.
The hex base is no longer necessary and is removed to save on filament and print dimensions.
Instructions:
- Print the piece twice
- Place on Gridfinity with 5 empty blocks between the two pieces
Note: the piece and Gridfinity base are positioned so that it can hold MK4 sized sheets perfectly. It should be able to hold Mini or XL sized sheets by moving the pieces closer together or further apart on the grid, but the fit won't be perfect.